Description: Torch specifically designed and made for the application of modified bitumen membranes. Thanks to its powerful flame, this torch allows very good performances and a high output. It has been designed paying the greatest attentino to safety and environmental aspects and also taking into consideration ergonomic factors and noise levels.
It has got a fast lever and a main valve by which the flow of gas can be opened, cut off and regulated to the low point. This model is fitted up with a head which allows a very high output. The valves are made of brass while the handwheel is made of plastic. It is flame welded with a silver/copper alloy and each part is tested very carefully. The whole range is available both in the standard version and with optional accessories.
Piezoelectric ignition
It is very handy to light the torch because it avoids gas dispersion and losses of time to the user.
Swivel connection
This connection is designed to avoid the swivelling of the gas hose during torching operations and to prevent the torch from becoming heavier and unstable.
Stand
It is possible to put down the torch with the bell upwards by adding a stand in order to avoid the contact of the flame with the surface to be heated.
Pressure regulator with safety valve
The pressure regulator can be equipped with a safety valve which stops hermetically the gas flow from the gas cylinder in case of breaking or bursting of the rubber hose. When the leakage is detected, the regulator will be reput in service by pressing a release button.